Woodworking Videos and articles for interior trim carpenters. Fast connections required. No fees, no registration, no cookies http://www.miterclamp.com/Installing_crown_molding.htm#videoindex Chestnut Tool en-us This video , Sept.24, 06, shows how to quickly recognize un-copable crown molding, and how to recognise how thin copes need to be. http://www.miterclamp.com/videos/uncopable_crown.wmv This video , Sept. 11, 06, shows how to cut plugs with a hand-held drill and remove those which break off below the surface of the stock being plugged. http://www.miterclamp.com/videos/plugging_holes384.wmv This Video is the first of the ellipse series and shows how to quickly and simply draw an ellipse wihout strings or mathmatics. http://www.miterclamp.com/videos/draw_ellipse385.wmv This Video is the second of the ellipse series and shows how easily construct a jig from scrap to cut ellipses. http://www.miterclamp.com/videos/ellipse_jig384.wmv This is the third (and last) Video in the ellipse series showing an ellipse being cut with a router. http://www.miterclamp.com/videos/Cutting_ellipse.wmv This Video shows how to modify a Makita power plane to increase the depth of cut. http://www.miterclamp.com/videos/power_plane385.wmv Article by Jim Chestnut on his production trim technique. First published by "Fine Homebuilding Magazine" in July 2004, it has been edited by the author and republished on his web site. Included is a new, short video on slotting casing for biscuits. http://www.miterclamp.com/perfect_ miters/pages/Perfect_miters1.html Video showing how to easily slot casing for biscuits without cocked slots and for good alignment. http://www.miterclamp.com/videos/biscuiting_casings384.wmv Video showing difficult Crown Molding being coped with a jig saw. http://www.miterclamp.com/videos/Crown_molding.wmv Video showing how to quickly clamp mitered casings http://www.miterclamp.com/videos/Clamping_miters.wmv Video showing tips for biscuit jointing mitered casing http://www.miterclamp.com/videos/Biscuit_jointing.wmv